With IntelliBlend Gravimetric dosing and blending unit for direct installation on the inlet flange of a plastics processing machine. The unit can dose and blend up to 4 components. Material blending with high accuracy and repeatability, specifically designed for injection moulding/blow moulding machines and extruders with an average throughput of 90 kg/h. Actual metered and weighed amounts are constantly checked against preselected set values by a modern microprocessor based control. This guarantees an exceptionally high recipe accuracy(+/- 0.1%) by continuous self-optimisation. The complete unit consists of: - 1 hopper for virgin material volume approximately 18 litres - 1 hopper for regrind material with enlarged cone discharge which can also be used for adding virgin material. Volume approximately 18 litres. - 2 hoppers for masterbach or additives. Volume approximately 18 litres. - Weigh bin. Volume approximately 0.8 litres. - Mixing hopper. Volume approximately 3.0 litres - Manually operated gate valve - Control with operation by graphic colour-touch panel, recipe, regrind and processing data administration, vibration management and continuous self-optimisation, extraordinary recipe management through IntelliBlend function. - Ethernet port on-board included - GRAVIreport print function optional. - Average throughput 90 kg/h - Dosing range per main component 1 - 100% - Dosing range per additive 0.5-10% - Power supply 1/N/PE 230V 50HZ - Connected load 100W - Compressed air 6 - 8 bar - Weight approximately 80kg - Colour RAL 2011 (Orange) and RAL 7040 (Grey)
Looking for more information? Arrange a call from one of our National Sales Team.